Step 01
Send Requirements
Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.
Part Guide
0603BB0150N / 0603BAB03141N: Disc Brake Pad Set for the Mahindra Scorpio 2.2, 2.49, 2.5 and 2.6
0603BB0150N and 0603BAB03141N are Mahindra's two references for the genuine disc brake pad set of the Scorpio 2.2, 2.49, 2.5 and 2.6. One set serves both calipers on the axle: four pads with clips. What makes this part different from most is that it exists in two versions, and our photographs show both.
Key takeaways
- Two numbers, one set: 0603BB0150N and 0603BAB03141N are both listed for the Scorpio 2.2, 2.49, 2.5 and 2.6.
- The set is four pads with clips, enough for both calipers on one axle.
- The set comes in two versions: wing-type anti-rattle clips, or spring clips with RH/LH and inboard/outboard marking.
- Marked pads are position-specific: fit each in the position printed on it.
- Squeal, grinding or a longer pedal travel point to worn pads or a sticking caliper.
Two versions of the same set
Mahindra lists this pad set under 0603BB0150N and 0603BAB03141N, and in our stock it comes in two versions. They do the same job but they are not identical to look at, and a parts book will not always tell you which your calipers expect. This is why we ask for the VIN, and for a photo of the old pads if you have one.
| Version | Clips | Marking |
|---|---|---|
| A | Wing-type anti-rattle clips | Mahindra branding on the backing plate |
| B | Spring clips | Pads marked RH or LH, and inboard or outboard |
Which Scorpios it fits
| Vehicle | Engine listed |
|---|---|
| Mahindra Scorpio | 2.2 |
| Mahindra Scorpio | 2.49 |
| Mahindra Scorpio | 2.5 |
| Mahindra Scorpio | 2.6 |
Source: our 0603BB0150N part page. For the XUV500 front pads, which are a different set, see our 0601AAA0021KT guide.
Not sure which version your calipers take?
Send a photo of your old padsReading the position markings
Version B pads are stamped on the edge of the backing plate. The stamps tell you where each pad belongs:
| Stamp | Where it goes |
|---|---|
| RH OUTBOARD | Right-hand caliper, the pad on the wheel side of the disc |
| RH INBOARD | Right-hand caliper, the pad on the piston side of the disc |
| LH OUTBOARD | Left-hand caliper, the pad on the wheel side of the disc |
| LH INBOARD | Left-hand caliper, the pad on the piston side of the disc |
Put each pad in the position printed on it. Swapping marked pads between sides is an easy way to make a new set noisy.
Fitting the set
- Remove the wheel and the caliper, supporting it so it does not hang on its hose.
- Take out the old pads and note which position each came from.
- Check the discs for scoring and minimum thickness.
- Clean and lightly lubricate the caliper slides.
- Push the pistons back slowly, watching the fluid level in the reservoir.
- Fit the new pads with their clips, each in its marked position.
- Refit the caliper, repeat on the other side, pump the pedal until firm, and bed the pads in with moderate stops before any hard braking.
What our photographs show
The pads in the three photographs on this page differ in the way described above: one set shows wing-type clips and the Mahindra name on the backing plate, the other shows spring clips and stamped position markings. Reference sources describe a disc brake as a rotor clamped between friction pads in a caliper, which is why the pad must sit in the correct position in the caliper that carries it.
Sources: our own stock photographs · Disc brake, Wikipedia
How to order 0603BB0150N
Nonu Ventures exports genuine Mahindra parts from India to importers, distributors, fleets and workshops. Send the part number, the VIN and, if possible, a photo of your old pads, plus the quantity and destination country. We confirm the fit against Mahindra's catalogue and reply within 24 hours. A quote template is available for bigger orders.
Frequently asked questions
Which number do I need, 0603BB0150N or 0603BAB03141N?
Both references are listed for this set on the Scorpio 2.2, 2.49, 2.5 and 2.6. Send your VIN and we will confirm which one your calipers take.
Is it one set per axle?
Yes. Four pads, enough for both calipers on the axle.
Why do some pads say RH, LH, inboard and outboard?
Marked pads are position-specific. Fit each one in the position printed on it.
My old clips look different from the ones in your photo. Is that a problem?
Mahindra supplies this set in two versions, one with wing-type anti-rattle clips and one with spring clips. Send us a photo of your old pads and the VIN and we will match them.
What are the signs the pads are worn?
Squeal, a grinding noise, or a pedal that travels further than it used to. These can also point to a sticking caliper.
Related guides
- 0601AAA0021KT front brake pads, XUV500
- 1102CA1950N power steering hose, Scorpio LHD
- Genuine vs fake Mahindra parts
Ready to order the right pads?
- ✓ Fitment checked against your VIN
- ✓ Export-packed
- ✓ Reply within 24 hours
0603BB0150N · Scorpio brake pad setView part page
- 24h Response
- Fitment Verified
- Worldwide Shipping
How we work
From your first enquiry to export dispatch — a straightforward three-step process built for international distributors and workshops.
Step 02
Quote & Confirm
Receive pricing, availability, and lead time. We verify fitment before you place the order.
Step 03
Ship Worldwide
Parts are QC-checked, export-packed, and dispatched via sea, air, or express courier to your nominated destination.
- Global Distributors
- Trusted Partners
- Fleet & Workshop
What distributors say
Importers, distributors, and fleet operators worldwide rely on Nonu Ventures for accurate OEM numbers and dependable export logistics.
- 24h Quote
- OEM Verified
- Export Desk
Contact export desk
B2B export for Europe, Australia, Africa, and South America. Email or WhatsApp your OEM part list — we verify fitment and respond within 24 hours.
Send your requirements
Include OEM part numbers, quantities, vehicle models, destination port, and preferred freight mode (FCL / LCL / air). Download our RFQ template to speed up quoting.
Export desk hours: Mon–Fri · 04:00–14:00 UTC