Part Guide

0309DM0210N: Mahindra EGR valve for Scorpio 2.2 mHawk, explained

0309DM0210N (also written 0309DM0210) is the genuine Mahindra EGR valve for the Mahindra Scorpio 2.2 mHawk. It is the vacuum-operated exhaust gas recirculation (EGR) valve that feeds a measured amount of exhaust gas back into the inlet. Test the vacuum supply before you replace it. Confirm fitment with your VIN before ordering.

Last updated: 28 October 2026 · By Nonu Ventures, exporter of genuine auto spare parts from India

Quick facts

Mahindra part number 0309DM0210N (also written 0309DM0210)
Part EGR valve
Vehicle Mahindra Scorpio 2.2 mHawk
Category Powertrain
Actuation Vacuum diaphragm, flanged body
Function Recirculates a measured amount of exhaust gas to lower combustion temperature and NOx
Mahindra VIN prefix MA1
Part page 0309DM0210N EGR Valve

What is Mahindra part 0309DM0210N?

Feeding inert exhaust gas back into the inlet lowers peak combustion temperature, which means fewer oxides of nitrogen (NOx) from the tailpipe.

The trade-off is soot. Exhaust gas carries carbon into the inlet, so EGR valves and inlet manifolds coke up over time, especially on engines that do short trips.

Which Mahindra models does 0309DM0210N fit?

Our 0309DM0210N part page lists it for: Scorpio 2.2 mHawk.

Check with your VIN before ordering for: Scorpio 2.5 / 2.6 (different engine: confirm with VIN); XUV500 2.2 mHawk (not listed on our page: confirm).

Fitment chart for Mahindra part 0309DM0210N EGR valve: Scorpio 2.2 mHawk listed; other versions to confirm with VIN
Where 0309DM0210N fits, from our part listing (original chart). Always confirm with your VIN.

What are the symptoms of a failed EGR valve?

  • Rough or lumpy idle (valve stuck open).
  • Hesitation under load.
  • Black smoke.
  • An EGR-related fault code (valve stuck closed often shows first as a stored emissions fault).

How do you confirm 0309DM0210N is the right part?

  1. Read the codes: EGR-related faults.
  2. Test vacuum: Hose, solenoid and vacuum pump.
  3. Check the VIN: Mahindra VINs start with MA1.
  4. Clean the inlet: Remove soot while the valve is off.

The number is written both as 0309DM0210N and 0309DM0210. Both refer to the same part.

Four checks before ordering Mahindra 0309DM0210N: Read the codes; Test vacuum; Check the VIN; Clean the inlet
Four checks before you order 0309DM0210N (original diagram).

Fitting notes for workshops

  • Test the vacuum first. A perished hose, failed solenoid or weak vacuum pump will stop the valve working even if the valve is fine.
  • Clean the manifold. If the old valve was heavily coked, clean the inlet manifold at the same time.
  • New gasket. Fit the valve to clean flange faces.

Related Mahindra part numbers

Where can importers and workshops get 0309DM0210N?

Nonu Ventures exports genuine Mahindra parts from India to importers, distributors, dealers, fleets and workshops in Europe, South America and the Caribbean. See the full listing on our 0309DM0210N EGR Valve part page.

Send the part number 0309DM0210N, your VIN and the quantity, and we will check fitment for you:

Related: Genuine vs fake Mahindra parts · All Mahindra parts

Frequently asked questions

What vehicle is 0309DM0210N for?

Our part page lists 0309DM0210N for the Mahindra Scorpio with the 2.2 mHawk diesel engine.

What are the symptoms of a failed EGR valve?

Rough idle, hesitation under load, black smoke and an EGR-related fault code are the usual signs.

Should I test anything before replacing the EGR valve?

Yes. The valve is vacuum-operated, so test for vacuum at the valve. A perished hose, failed solenoid or weak vacuum pump can stop a good valve working.

Is 0309DM0210 the same as 0309DM0210N?

Yes. Both forms of the number are used for the same Mahindra EGR valve.

How do I order 0309DM0210N?

Send the part number, your VIN and the quantity on WhatsApp (+91 96734 23753) or to info@nonuventures.com. We check fitment against Mahindra's catalogue before you order.

  • 24h Response
  • Fitment Verified
  • Worldwide Shipping

How we work

From your first enquiry to export dispatch — a straightforward three-step process built for international distributors and workshops.

Step 01

Send Requirements

Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.

Step 02

Quote & Confirm

Receive pricing, availability, and lead time. We verify fitment before you place the order.

Step 03

Ship Worldwide

Parts are QC-checked, export-packed, and dispatched via sea, air, or express courier to your nominated destination.

  • Global Distributors
  • Trusted Partners
  • Fleet & Workshop

What distributors say

Importers, distributors, and fleet operators worldwide rely on Nonu Ventures for accurate OEM numbers and dependable export logistics.

  • 24h Quote
  • OEM Verified
  • Export Desk

Contact export desk

B2B export for Europe, Australia, Africa, and South America. Email or WhatsApp your OEM part list — we verify fitment and respond within 24 hours.

Send your requirements

Include OEM part numbers, quantities, vehicle models, destination port, and preferred freight mode (FCL / LCL / air). Download our RFQ template to speed up quoting.

Export desk hours: Mon–Fri · 04:00–14:00 UTC