Send Requirements
Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.
The newer Bajaj RE (petrol, CNG and LPG) uses Bajaj part AH131624 as its rear wheel bearing, two per vehicle, fitted with rear axle assembly AH131214. Older RE 4S and RE FL catalogues list a different rear bearing, 01100342, in a different axle set. Bajaj does not print a size for AH131624, so order by part number and axle number, or measure the old bearing first.
Summarize this page with AI: ChatGPT · Perplexity
| Newer RE rear wheel bearing | AH131624 "Bearing Ball", 2 per vehicle |
| Newer RE rear axle assembly | AH131214 (catalogue MF & BF OBD2B, May 2025, Plate 35) |
| Older RE 4S / RE FL rear bearing | 01100342 "Bearing ball" (catalogue Rev. August 2020) |
| Older RE rear axle assembly | 24171118 |
| Bearing size printed by Bajaj for AH131624 | None |
| Same in both designs | Oil seal 24171024 |
| Safest way to order | Part number + rear axle number, or measure the old bearing |
This guide is about choosing the right number and size. For what AH131624 is, how to spot a fake and when to replace it, read our AH131624 genuine part guide.
The easiest clue is the rear axle assembly number. The bearing, circlip and axle are listed together, so if one number matches, the others usually do too.
| Clue | Newer RE (petrol / CNG / LPG) | Older RE 4S / RE FL |
|---|---|---|
| Parts catalogue | MF & BF OBD2B, Rev. 00, May 2025 | RE compact 4S FL, Rev. August 2020 |
| Rear axle assembly | AH131214 | 24171118 |
| Internal circlip | KEBB4717 | 39034217 |
| Rear wheel bearing | AH131624 | 01100342 |
| Oil seal | 24171024 | 24171024 |
| Bearings per vehicle | 2 | 2 (listed on Plate 32) |
If you have no catalogue and no label, go to the measuring steps below.
For AH131624, Bajaj does not publish a size. The catalogue lists it only as "Bearing Ball". We have not seen a Bajaj source that gives its bore, outside diameter or width, so we do not give one here.
For the older bearing 01100342, the sources we read do not agree:
| Source | What it says |
|---|---|
| Bajaj RE 4S FL catalogue, Plate 32 (Trailing arm) | 01100342 "Bearing 30X55X13 – Rear Hub" |
| Bajaj RE 4S FL catalogue, Plate 33 (Rear wheel axle) | 01100342 "Bearing ball" (no size) |
| A Bajaj distributor's online parts shop (RE 175cc, 205D, RE FL, RE FL BS IV) | "Bearing ball [6204]", also in a rear wheel bearing kit with a needle bearing (SL 3520) and two grease seals |
| A third-party parts list | 01-1003-42 shown as "ball bearing 6204" |
A 30 × 55 × 13 mm bearing and a 6204 (20 × 47 × 14 mm in standard tables) are not the same size. So a size printed in a list is not enough on its own.
Our advice: trust the Bajaj part number first. If you need a size, measure the old bearing.
Send the three numbers, the photos and the rear axle number to us, and we will match the Bajaj part number for you.
| AH131624 | 01100342 | |
|---|---|---|
| Vehicle in catalogue | Bajaj RE Petrol (AU), CNG (AF), LPG (AM) | Bajaj RE 4S and RE FL (older design) |
| Catalogue | MF & BF OBD2B, Rev. 00, May 2025 | RE compact 4S FL, Rev. August 2020 |
| Plate | 35, Rear Wheel Axle – RE, item 3 | 32 (Trailing arm) and 33 (Rear wheel axle) |
| Rear axle assembly | AH131214 | 24171118 |
| Internal circlip | KEBB4717 | 39034217 |
| Size in the catalogue | Not given | "30X55X13" on Plate 32 only |
| Qty per vehicle | 2 | 2 |
Is AH131624 a replacement for 01100342? We have not found a Bajaj notice that says so. The two bearings sit in different rear axle sets, so do not swap one for the other unless the axle parts match.
| What to compare | Bajaj part number + rear axle number | Bearing size only (d × D × B) | Vehicle name only ("Bajaj RE") |
|---|---|---|---|
| Right part first time | High: matches the catalogue | Medium: depends on correct measuring | Low: newer and older RE use different bearings |
| Seal and fit match the original | Yes, same Bajaj part | Not always: seal type and fit can differ | Unknown |
| What you need | Catalogue, old label or dealer | Caliper and the old bearing | Nothing, but it is a guess |
| Works for a mixed fleet | Yes, one line per axle number | Yes, if each bearing is measured | No |
| Best for | Ordering genuine Bajaj parts | Checking an unknown old part | Not recommended |
We scored each way of ordering on how likely it is to give the right part, using only what the catalogues and our measuring steps show. The scores are our judgement, not test results.
For the newer Bajaj RE petrol, CNG and LPG, it is AH131624, two per vehicle, listed on Plate 35 of the Bajaj RE parts catalogue (MF & BF OBD2B, May 2025). Older RE 4S and RE FL catalogues list 01100342.
Bajaj does not publish a size for AH131624. For the older 01100342, sources disagree (30 × 55 × 13 mm in one catalogue line, 6204 in other lists). Measure the old bearing's bore, outside diameter and width to be sure.
We have not found a Bajaj source that says AH131624 replaces 01100342. They are listed with different rear axle assemblies (AH131214 and 24171118), so do not swap them unless the axle parts match.
Two, one on each rear wheel. Replace them as a pair, with a new oil seal 24171024.
Send the model, fuel type, the rear axle number if you can read it, and two photos of the old bearing with its bore, outside diameter and width. We will match the Bajaj part number.
Send the part number or your rear axle number, the model and the quantity, and we will check it for you:
From your first enquiry to export dispatch — a straightforward three-step process built for international distributors and workshops.
Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.
Receive pricing, availability, and lead time. We verify fitment before you place the order.
Parts are QC-checked, export-packed, and dispatched via sea, air, or express courier to your nominated destination.
Importers, distributors, and fleet operators worldwide rely on Nonu Ventures for accurate OEM numbers and dependable export logistics.
B2B export for Europe, Australia, Africa, and South America. Email or WhatsApp your OEM part list — we verify fitment and respond within 24 hours.
Include OEM part numbers, quantities, vehicle models, destination port, and preferred freight mode (FCL / LCL / air). Download our RFQ template to speed up quoting.
Export desk hours: Mon–Fri · 04:00–14:00 UTC