Step 01
Send Requirements
Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.
Part Guide
0802CAA04380N: Mahindra concentric slave cylinder (3-hole) for Scorpio 2.2, explained
0802CAA04380N (also written 0802CAA04380) is the genuine Mahindra concentric slave cylinder (3-hole) for the Mahindra Scorpio 2.2. It is the concentric slave cylinder (CSC): the clutch slave cylinder and release bearing in one unit, inside the bell housing. It has a 3-hole mounting flange and pairs with clutch master cylinder 0606AB0350N. Confirm fitment with your VIN before ordering.
Quick facts
| Mahindra part number | 0802CAA04380N (also written 0802CAA04380) |
| Part | Concentric slave cylinder, 3 hole |
| Vehicle | Mahindra Scorpio 2.2 |
| Mounting | 3-hole flange |
| Supplied as | Cylinder with integral release bearing, feed line and bleed fitting |
| Pairs with | 0606AB0350N clutch master cylinder |
| Category | Clutch & Gearbox |
| Mahindra VIN prefix | MA1 |
| Part page | 0802CAA04380N Concentric Slave Cylinder (3 Hole) |
What is Mahindra part 0802CAA04380N?
The CSC sits around the gearbox input shaft. Hydraulic pressure from the clutch master cylinder pushes the bearing straight onto the diaphragm fingers: no fork, no pivot, no external cylinder.
The '3 hole' in the name is the bolt pattern of the mounting flange. Some gearboxes use a different pattern.
What comes with 0802CAA04380N?
- Concentric slave cylinder
- Integral release bearing
- Feed line
- Bleed fitting
Which Mahindra models does 0802CAA04380N fit?
Our 0802CAA04380N part page lists it for: Scorpio 2.2, 3-hole flange.
Check with your VIN before ordering for: Scorpio with another bolt pattern (different unit: confirm with VIN).
What are the signs of a failing concentric slave cylinder?
- Clutch fluid is lost with no leak visible outside the gearbox.
- A whine that changes when the clutch pedal is pressed (bearing).
- The clutch does not fully disengage, or the pedal feels soft.
- The gearbox has to come out to reach it, so it is usually changed with the clutch.
How do you confirm 0802CAA04380N is the right part?
- Count the holes: 3-hole flange.
- Check the VIN: Mahindra VINs start with MA1.
- Add master cylinder? 0606AB0350N if needed.
- Plan bleeding: Bleed until the pedal is firm.
The number is written both as 0802CAA04380N and 0802CAA04380. Both refer to the same part.
Fitting notes for workshops
- Count the bolt holes. This unit has a 3-hole flange. Check the old unit before ordering.
- Fit with the clutch. The gearbox is already out for a clutch change, so replace the CSC at the same time.
- Bleed carefully. A CSC traps air easily. Bleed from the fitting on the line until the pedal is firm, with fresh DOT fluid.
Related Mahindra part numbers
- 0606AB0350N: clutch master cylinder, Scorpio 2.2 mHawk
Where can importers and workshops get 0802CAA04380N?
Nonu Ventures exports genuine Mahindra parts from India to importers, distributors, dealers, fleets and workshops in Europe, South America and the Caribbean. See the full listing on our 0802CAA04380N Concentric Slave Cylinder (3 Hole) part page.
Send the part number 0802CAA04380N, your VIN and the quantity, and we will check fitment for you:
- WhatsApp: Chat with us on WhatsApp (+91 96734 23753)
- Email: info@nonuventures.com
Related: Genuine vs fake Mahindra parts · All Mahindra parts
Frequently asked questions
What vehicle is 0802CAA04380N for?
Our part page lists 0802CAA04380N for the Mahindra Scorpio 2.2, with a 3-hole mounting flange.
Is a concentric slave cylinder the same as a release bearing?
It includes one. The CSC combines the slave cylinder and the release bearing in a single unit.
What does '3 hole' mean?
The mounting flange has three bolt holes. Check the bolt count on your existing unit or send us your VIN.
Does it come with the clutch master cylinder?
No. The clutch master cylinder for the same engine is 0606AB0350N.
How do I order 0802CAA04380N?
Send the part number, your VIN and the quantity on WhatsApp (+91 96734 23753) or to info@nonuventures.com. We check fitment against Mahindra's catalogue before you order.
- 24h Response
- Fitment Verified
- Worldwide Shipping
How we work
From your first enquiry to export dispatch — a straightforward three-step process built for international distributors and workshops.
Step 02
Quote & Confirm
Receive pricing, availability, and lead time. We verify fitment before you place the order.
Step 03
Ship Worldwide
Parts are QC-checked, export-packed, and dispatched via sea, air, or express courier to your nominated destination.
- Global Distributors
- Trusted Partners
- Fleet & Workshop
What distributors say
Importers, distributors, and fleet operators worldwide rely on Nonu Ventures for accurate OEM numbers and dependable export logistics.
- 24h Quote
- OEM Verified
- Export Desk
Contact export desk
B2B export for Europe, Australia, Africa, and South America. Email or WhatsApp your OEM part list — we verify fitment and respond within 24 hours.
Send your requirements
Include OEM part numbers, quantities, vehicle models, destination port, and preferred freight mode (FCL / LCL / air). Download our RFQ template to speed up quoting.
Export desk hours: Mon–Fri · 04:00–14:00 UTC