0114AAG00611N: Mahindra lock set and ignition switch for Scorpio S10, explained

Quick facts

What is Mahindra part 0114AAG00611N?

The set is supplied as a matched kit so the steering lock, the doors and the fuel flap all work with the same key. That is why it is sold as one part number rather than as separate barrels.

The black module on the steering lock is the immobiliser antenna. Its Mahindra label reads ANTENNA ASSY IMMOBILISER, part 1309AAA00031N, with the control unit marking UICU-D17.

What comes with 0114AAG00611N?

• Steering lock housing with ignition switch
• Immobiliser antenna assembly, marked 1309AAA00031N
• Two keys
• Door lock barrel with operating cam
• Fuel flap barrel
• Retaining clip

Which Mahindra models does 0114AAG00611N fit?

Our 0114AAG00611N part page lists it for: Scorpio S10 (new model).

Check with your VIN before ordering for: Other Scorpio versions (not listed: confirm with VIN); XUV500 (own lock set: 0114AAW00641N).

When does a Scorpio S10 need a new lock set?

• Keys are lost or stolen, so the old keys must no longer start the vehicle.
• The ignition switch or steering lock is worn or damaged, for example after a break-in.
• A key no longer turns smoothly in the ignition, door or fuel flap.
• The immobiliser does not recognise the key and the engine cranks but does not start (check the key and battery first).

How do you confirm 0114AAG00611N is the right part?

1. Read the label: Check the antenna label: 1309AAA00031N, UICU-D17.
2. Check the VIN: Mahindra VINs start with MA1.
3. Confirm model: Scorpio S10, new model.
4. Plan coding: Book key programming for your market.

The number is written both as 0114AAG00611N and 0114AAG00611. Both refer to the same part.

Fitting notes for workshops

• Programming is part of the job. A replacement immobiliser set must be coded to the vehicle before the keys will start it. Plan for dealer-level key programming in your market.
• Fit the whole set. Fit the door and fuel flap barrels too, or the customer will need two keys.
• Read the old label. Compare the marking on the old immobiliser antenna with 1309AAA00031N / UICU-D17.

Related Mahindra part numbers

• 1309AAA00031N: immobiliser antenna assembly (fitted to this set)
• 0114AAW00641N: lock cylinder and ignition switch set for the XUV500

Where can importers and workshops get 0114AAG00611N?

Nonu Ventures exports genuine Mahindra parts from India to importers, distributors, dealers, fleets and workshops in Europe, South America and the Caribbean. See the full listing on our 0114AAG00611N Lock Set & Ignition Switch (New Model) part page.

Send the part number 0114AAG00611N, your VIN and the quantity, and we will check fitment for you:

• WhatsApp: Chat with us on WhatsApp (+91 96734 23753)
• Email: info@nonuventures.com

Related: Genuine vs fake Mahindra parts · All Mahindra parts

Frequently asked questions

What vehicle is 0114AAG00611N for?

0114AAG00611N is the genuine Mahindra lock set and ignition switch (new model) for the Mahindra Scorpio S10.

Does 0114AAG00611N include the immobiliser?

Yes. The steering lock carries the immobiliser antenna assembly 1309AAA00031N, marked UICU-D17 on the Mahindra label.

Will the keys work without programming?

No. An immobiliser set must be coded to the vehicle first, or the engine will crank without starting. Send your VIN and we will tell you what your market needs.

Is 0114AAG00611 the same part as 0114AAG00611N?

Yes. Both forms of the number are used for the same Mahindra lock set. Searching either one should lead you to this part.

What is in the box?

A steering lock with ignition switch and immobiliser antenna, two keys, a door lock barrel, a fuel flap barrel and a retaining clip.

How do I order 0114AAG00611N?

Send the part number, your VIN and the quantity on WhatsApp (+91 96734 23753) or to info@nonuventures.com. We check fitment against Mahindra's catalogue before you order.