Mahindra OEM · Powertrain

Drive Gear & Pinion 43×10 (Corona y Piñón)

Answer: Reference DRIVE-GEAR-PINION-43X10 is for Mahindra Goa / Scorpio (2.5, 2.6). Fitment-verified, export-packed, and quoted within 24 hours for distributors and workshops worldwide.

Drive Gear & Pinion 43×10 (Corona y Piñón) product photo — Mahindra OEM DRIVE-GEAR-PINION-43X10 for Mahindra Goa / Scorpio — Nonu Ventures
Product photograph of Drive Gear & Pinion 43×10 (Corona y Piñón) (OEM part number DRIVE-GEAR-PINION-43X10) for Mahindra Goa / Scorpio. Compatible variants: 2.5, 2.6. Category: Powertrain. Genuine Mahindra OEM / export-grade component from Nonu Ventures for international distributors and workshops.
DRIVE-GEAR-PINION-43X10

Drive Gear & Pinion 43×10 (Corona y Piñón) for Mahindra Goa / Scorpio

Part ReferenceDRIVE-GEAR-PINION-43X10
Vehicle PlatformMahindra Goa / Scorpio
Compatible Variants2.5, 2.6
CategoryPowertrain
Tooth Count43×10 (crown × pinion)
SpanishCorona y piñón 43×10
Other Ratios50×11 for Bolero 2.5 and Goa / Scorpio 2.5, 2.6; 41×9 (0502DA1760N) for mHawk 2.2
Also Searched Ascorona y pinion 43x10, Scorpio crown wheel pinion 43x10, Goa differential gear set
ConditionGenuine OEM / Export Grade
AvailabilityExport — quote within 24 hours
ExporterNonu Ventures (info@nonuventures.com)

Crown wheel and pinion set, 43×10 tooth count, for Mahindra Goa and Scorpio 2.5 and 2.6. Corona y piñón 43×10 — supplied as a lapped matched pair and export-packed.

  • Cross-referenced to Mahindra OEM catalogues before dispatch
  • Export-grade packaging for sea, air, and express freight
  • Fitment confirmed by our technical team before you order

43×10 is one of several ratios for this platform

This set is 43×10 — forty-three crown wheel teeth to ten pinion teeth. The Goa and Scorpio 2.5 and 2.6 were also built with a 50×11 set, and the mHawk 2.2 uses 41×9 (0502DA1760N).

Fitting the wrong ratio to one axle of a four-wheel-drive vehicle will wind up the transmission. Count the teeth on the set you are removing, and if the vehicle is 4×4 make sure both axles match.

Matched pair, specialist fitting

Crown wheel and pinion are lapped together at manufacture and are supplied and replaced as a pair. Never mix new with old.

Pinion depth, backlash and bearing preload all need setting and the contact pattern checking on fitting. This is not a job to attempt without the right tooling.

Questions about DRIVE-GEAR-PINION-43X10

Clear answers for importers, workshops, and distributors.

DRIVE-GEAR-PINION-43X10 is a Mahindra OEM powertrain component for Mahindra Goa / Scorpio (2.5, 2.6). Drive Gear & Pinion 43×10 (Corona y Piñón) is supplied with fitment verification for export orders.

Count the teeth on the crown wheel you are removing, or read the ratio stamped on its face. Both were fitted to Goa and Scorpio 2.5 and 2.6, so the model alone does not tell you which.

On a four-wheel-drive vehicle, yes. Mismatched ratios front to rear wind the transmission up and will destroy the transfer case.

Email info@nonuventures.com or WhatsApp +91 96734 23753 with the OEM part number, quantity, and shipping destination. We reply with pricing and lead time, typically within 24 hours.

Yes — lines we list are genuine OEM or export-grade equivalents, cross-referenced to Mahindra catalogues before dispatch, with fitment verification and export packaging.

We export worldwide with focus on Europe, Australia, Africa, and South America via sea (FCL/LCL), air cargo, and express courier (DHL/FedEx).

Export markets

  • 24h Response
  • Fitment Verified
  • Worldwide Shipping

How we work

From your first enquiry to export dispatch — a straightforward three-step process built for international distributors and workshops.

Step 01

Send Requirements

Share your part list with OEM numbers, vehicle models, and quantities. We respond within 24 hours.

Step 02

Quote & Confirm

Receive pricing, availability, and lead time. We verify fitment before you place the order.

Step 03

Ship Worldwide

Parts are QC-checked, export-packed, and dispatched via sea, air, or express courier to your nominated destination.

  • See Before You Buy
  • OEM Numbers Shown
  • Packaging Proof

Product Videos

See our spare parts up close — OEM numbers, fitment details, and packaging quality, straight from our catalogue.

0052903 Differential Assembly 4×4 — Scorpio

  • Global Distributors
  • Trusted Partners
  • Fleet & Workshop

What distributors say

Importers, distributors, and fleet operators worldwide rely on Nonu Ventures for accurate OEM numbers and dependable export logistics.

  • 24h Quote
  • OEM Verified
  • Export Desk

Contact export desk

B2B export for Europe, Australia, Africa, and South America. Email or WhatsApp your OEM part list — we verify fitment and respond within 24 hours.

Send your requirements

Include OEM part numbers, quantities, vehicle models, destination port, and preferred freight mode (FCL / LCL / air). Download our RFQ template to speed up quoting.

Export desk hours: Mon–Fri · 04:00–14:00 UTC

  • OEM Verified
  • Worldwide
  • 24h Quotes

Common questions

Answers about models, OEM quality, shipping, and lead times. Need something specific? Send your part list and we’ll respond within 24 hours.

We export OEM spare parts for Mahindra (Scorpio, Bolero, XUV500, Thar, CJ340, and more), Tata Motors, Hyundai, Maruti Suzuki, and JCB equipment. Need another vehicle OEM? We source on request — email your part list via our export desk or send your part list for a custom quote.

Yes. We supply genuine OEM parts with authentic manufacturer part numbers, plus vetted aftermarket alternatives on request. Every unit is fitment-verified before dispatch.

Yes. We export to distributors, workshops, and fleet operators globally — via sea freight (FCL/LCL), air cargo, or express courier (DHL/FedEx) to your nominated destination.

Typically 15–45 days depending on part availability and freight method. In-stock items can ship in 7–10 days via air. See our shipping lead times guide for mode-by-mode ranges.

Send your part list with OEM numbers, vehicle models, and quantities via email, WhatsApp, or our export desk. We respond within 24 hours with pricing and availability.

100% fitment guarantee. Our technical team confirms compatibility before you order, and we resolve any issues post-delivery.